WifiMETRIX uses the LCD screen and keyboard to access menus and features. It’s really pretty simple to use, though we’ve summarized a few of the menus below. In general, you would use the UP / DOWN arrow keys to highlight a menu option and then press the ENTER key to move to the next screen. You can always return to the top-level main menu by pressing the MENU key.
|
When the device is powered-on it will display the main menu. Use the UP / DOWN arrow keys to highlight an option and then press the ENTER key to move to the next screen. You can always return to this top-level menu by pressing the MENU key. From this main menu you would select one of the following functionalities: AirHORN, WifiPROBE, or Radar Simulation (DFS Testing). |
|
This is the primary menu for Radar Simulation (DFS Testing). Here you can select which DFS channel to test, the radar type (i.e. pulse pattern / waveform), and whether to transmit just the selected radar type or sequentially traverse all of them. We recommend starting-off with ‘Radar Type: FCC 2 (or FCC 3)’. Also, though the traverse mode seems like a good idea but, in practice, doesn’t work as well. So, stick with ‘Single Radar Type’. ‘ |
|
This is the primary menu for AirHORN. Here you can select which Wi-Fi band to use, output power and which AirHORN mode to use. |
|
This is the primary menu for WifiPROBE. Here you can select which Wi-Fi band to use, and which WifiPROBE mode to use. |